Your current location：Home > Products > Zinc shot\Zinc ball
Introduction Name：zinc shot They are delicately made with the process of drawing, cutting and conditioning etc.. And they are used for deburing and cleaning on various Aluminium alloy, Zinc diecastings. Because their specific gravity is close to steel and the hardness is low, the deburing can be performed without wearing the products' surfaces. Otherwise distinguished from Aluminium abrasive, the security is nice for much lower kinding point of the dust. And they are also characterised at obvious whitening on the surfaces of the workpieces.
Otherinfo
Main chemical compositions:
Fe
Zn
Al
Co
Cu
others
0.004
99.99
0.003
0.002
0.001
SIZE: 0.3mm---3.0mm
Hardness: HV38-55/HV45-60
According to customers' requirements, the packing can be 25kgs/bag or 1ton/sack.
